Toro Workman MDX-D Service Manual page 109

Brakes (continued)
Problem
Brakes pull to either side.
Brakes squeal.
Brakes drag.
Brake pedal is hard to push.
Wheels lock--up when braking.
Brakes fade.
Vehicle surges at slow speeds and
chatters at fast speeds.
Workman MDX--D
Possible Cause
Tire pressure is incorrect or uneven between tires.
Rear brake linings or front brake pads are contaminated.
Front wheel alignment (toe--in) is incorrect.
Rear brake shoes are distorted.
Tires on same axle are unmatched.
Rear brake linings or front brake pads is glazed or saturated.
Rear brake shoe--to--shoe spring(s) is (are) weak or broken.
Rear brake shoes are distorted.
Anchor plate is bent.
Rear brake drums and shoes are dusty.
Small rock or other debris is caught in brakes.
Rear brake drums are scored or out--of--round.
Front brake rotors are scored or damaged.
Parking brake is applied or incorrectly adjusted.
Rear brake shoe--to--shoe spring(s) is (are) weak or broken.
Brake pedal is binding.
Parking brake cable is binding.
Rear brake linings or front brake pads are saturated.
Rear brake drums or front brake rotors are bent or out--of--round.
Incorrect brake lining material.
Brake pedal linkage is binding.
Rear brake linings or front brake pads are contaminated.
Rear brake linings or front brake pads are damaged.
Wheel or transaxle bearings are damaged.
Rear brake shoe--to--shoe springs are weak.
Brake drums are grooved in the brake shoe contact area.
Rear brake drums or front brake rotors are overheated and warped.
Rear brake linings or front brake pads are saturated.
Rear brake drums or front brake rotors are bent or out--of--round.
Page 6 - - 7 Chassis