Stereo/Mono Switch; Display Information; Telescopic Antenna; Volume Control - Sangean MMR-88 Operating Instructions Manual

Recall stations
. Turn on the radio, press the PRESET button to enter the preset mode,
the display will show your last preset station position.
2. Press the Tuning Up/Down button to select your desired preset
station.
3. Press and release the PRESET button to skip preset mode, the P
(preset) and preset position will disappear. You may then press the
Tuning UP/Down button to tune to the next desired station.

Telescopic Antenna

The telescopic antenna is used for the FM reception. Extend fully
and rotate for the best FM reception. There is a built-in directional bar
antenna for the AM band reception. To achieve the best AM reception, it
may be necessary to move the radio to achieve proper reception.

Stereo/Mono switch

If the FM radio station being listened to has a weak signal, some hiss
may be audible. It is possible to reduce this hiss by forcing the radio to
play the station in mono rather than stereo.
Press and hold the Display/Mono button to switch to mono. LCD display
Stereo icon will disappear.
Note:
FM stereo is only available via earphones.

Volume Control

Press the Volume Control Button (+/-) to adjust the desired level of
sound.

Display information

When the radio is on, press and release the Display button. You can
switch the on-screen information between station frequency and time.
GB
0