Miele KM 2014 Operating And Installation Instructions page 13

~
For safety reasons, this appliance may only be used when it has
been built in.
~
Never open the outer casing of the appliance. Tampering with
electrical connections or components and mechanical parts is
highly dangerous to the user and can cause operational faults.
~
Installation, maintenance and repairs may only be carried out by
a suitably qualified and competent person in strict accordance with
current national and local safety regulations.
Repairs and other work by unqualified persons could be dangerous.
Miele cannot be held liable for unauthorised work.
~
During installation, maintenance and repair work, the appliance
must be disconnected from the gas supply and mains electricity
supply.
~
While the appliance is under guarantee, repairs should only be
undertaken by a service technician authorised by Miele. Otherwise
the guarantee is invalidated.
~
Faulty components must only be replaced by genuine Miele
original spare parts. The manufacturer can only guarantee the safety
of the appliance when Miele replacement parts are used.
~
If the connection cable is damaged, it must be replaced by a
suitably qualified electrician with a special connection cable of type
H 05 V V-F (pvc insulated), available from the Miele Spare Parts
Department.
~
Do not connect the appliance to the mains electricity supply by a
multi-socket adapter or an extension lead. These do not guarantee
the required safety of the appliance (e.g. danger of overheating).
~
Do not use the hob if it is faulty. Switch it off immediately and
disconnect it from the mains electricity supply and the gas supply.
Call the Service Department.
Warning and Safety instructions
13