Wash Options - Hotpoint Ariston LSF 712 Operating Instructions Manual

Hide thumbs Also See for LSF 712:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Wash options*

The OPTIONS may only be set, modified or reset
after the wash cycle has been selected and before
the Start/Pause button has been pressed.
Only the options which are compatible with the type of
wash cycle set may be selected. If an option is not com-
patible with the selected was cycle (see Table of wash
cycles), the corresponding LED flashes rapidly 3 times.
If an option is selected which is incompatible with an-
other option or wash cycle selected previously, the in-
compatible option light will flash 3 times and switches
off, while the most recently selected setting remains lit.
To deselect an option which has been set by mis-
take, press the corresponding button again.
or 9
The Delayed Start function cannot be set once the
wash has already started.
If there are not many dishes to be washed, a half load
cycle may be used in order to save water, electricity and
detergent. Select the wash cycle and press the HAL.
LOAD button: the indicator light will illuminate.
Remember to halve the amount of detergent.
It is better to use powder detergent in this case.
This option is incompatible with the following wash
cycle: Rapid wash.
Table of
options
1. Intensive
3, 6
2. Normal
3. Daily 60'
4. Soak
5. Eco
6. Rapid
7. Crystal
*
A
B
Delayed
Half
Start
Load
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
EN
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents