Meridian 808 Signature Reference User Manual page 36

32
Installing the 808
Signature Reference
CD Player
To connect to DSP loudspeakers using SpeakerLink (daisy chain)
Front R – Slave
The 808 can be connected directly to Meridian DSP
loudspeakers to create a complete compact stereo
system, with volume and other preamplifier controls
provided by the loudspeakers via the MSR+ or the front
panel.
The Meridian SpeakerLink connection provides both
two-channel digital audio and Meridian Comms control.
This is an alternative to the "home run" wiring
configuration shown in the next section.
• Connect the upper SpeakerLink output from the 808
to the SpeakerLink input on the DSP loudspeaker
chosen as the Master, using a SpeakerLink lead.
• Connect the SpeakerLink output from the Master
DSP loudspeaker to the SpeakerLink input on the
other (Slave) DSP loudspeaker, using a second
SpeakerLink lead.
• Configure the loudspeakers as described in the
Meridian DSP Loudspeaker User Guide .
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
SpeakerLink lead
808 Signature Reference CD Player
MERIDIAN
SPEAKERLINK
• Configure the 808 as described in Configuring the
808 Reference Audio Core , page 39, or by using the
Meridian Configuration Application; see Installing the
Meridian Configuration Application , page 46.
Front L – Master
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
SpeakerLink lead