Do you have a question about the 207 Pro and is the answer not in the manual?
Questions and answers
Brian Neeson
February 1, 2025
the drawer will not open
1 comments:
Mr. Anderson
February 10, 2025
The drawer on the Meridian 207 Pro may not open due to issues with the transport mechanism. To access and troubleshoot the problem, you need to remove the back plate screw, lift the back plate slightly, and disconnect the slider rods from the chassis. The guide plate that moves the CD clamp arm must also be removed by unscrewing two hex screws with nuts. Additionally, the ribbon cable and drawer motor supply should be disconnected. There are two more screws at the front of the transport that need to be removed to take out the entire drawer and transport system. Care must be taken not to damage the fragile limit switches or ribbon cable.
Need help?
Do you have a question about the 207 Pro and is the answer not in the manual?
Questions and answers
the drawer will not open
The drawer on the Meridian 207 Pro may not open due to issues with the transport mechanism. To access and troubleshoot the problem, you need to remove the back plate screw, lift the back plate slightly, and disconnect the slider rods from the chassis. The guide plate that moves the CD clamp arm must also be removed by unscrewing two hex screws with nuts. Additionally, the ribbon cable and drawer motor supply should be disconnected. There are two more screws at the front of the transport that need to be removed to take out the entire drawer and transport system. Care must be taken not to damage the fragile limit switches or ribbon cable.
This answer is automatically generated