Separate Hold Setting - Sony RM-1000BP Operating Instructions Manual

Separate HOLD Setting

You can set the each control key to the key that is set to HOLD or the key that can be operated
when the HOLD switch is set to ON.
The default setting is that all operations are set to HOLD.
Setting to the separate HOLD setting status
1 Slide the HOLD switch to ON.
This unit is set to the HOLD mode.
 While you press and hold the DISPLAY key, press and hold the SEL/
PUSH EXEC lever to the left for two seconds or more.
This unit enters the HOLD key editable mode.
By changing the position of the ZOOM SPEED switch, you can select the mode among
the following three modes.
ZOOM SPEED
switch position
1-GB
Mode Function
HOLD In this mode, the operation of that key
key select toggles between usable/prohibited when set
mode to HOLD.
HOLD In this mode, whether the control key can
key check be operated when this unit is set to HOLD is
and store displayed on the REC LED by pressing the
mode key.
Press and hold the SEL/PUSH EXEC lever
for two seconds or more to store the setting
set in the HOLD key select mode.
HOLD In this mode, press and hold the SEL/PUSH
key EXEC lever for two seconds or more to
initialize initialize the setting of the control key.
mode
Mode
display
POWER
LED lights
(red).
POWER
LED lights
(orange).
POWER
LED blinks
(red).