CanyCom S25A Operator's Manual page 76

Area Malfunction
Brake does not work
Brake
well.
Hydraulic components
Hydraulic (hydraulic motor,
System cylinder) does not
work properly.
Track does not move
smoothly.
Chassis
Machine does not
travel straight.
Dump
Tailgate does not open
Vessel
or close properly.
Related
Lamp does not light.
Safety
Devices
Lamp does not light.
Troubleshooting
Possible Cause
Problem in hydraulic
system.
Other (other than the
above).
Insufficient or
deteriorated hydraulic
oil.
Hydraulic oil is
contaminated
Oil filter is clogged.
Oil leaks
Other (other than the
above).
Not properly adjusted.
Other (other than the
above).
Roller, upper roller,
idler or sprocket is
broken.
Other (other than the
above).
Not properly adjusted.
Foreign object is stuck
in the gate.
Other (other than the
above).
Blown bulb.
Blown fuse.
Other (other than the
above).
Blown fuse.
Other (other than the
above).
-67-
Corrective Measure
→See below
→Please contact
your CANYCOM
representative.
→Fill or change oil.
→Change oil.
→Change filter.
→Repair leak.
→Please contact
your CANYCOM
representative.
→Adjust.
→Please contact
your CANYCOM
representative.
→Repair or replace.
→Please contact
your CANYCOM
representative.
→Adjust.
→Remove the foreign
object.
→Please contact
your CANYCOM
representative.
→Replace.
→Replace.
→Please contact
your CANYCOM
representative.
→Replace.
→Please contact
your CANYCOM
representative.
6
Ref.
Page 42
Page 42
Page 47
Page 50
Page 61