CanyCom S25A Operator's Manual page 43

5
Item
Valve
Clearance
Compression
Engine
Mount
Lubrication
System
Fuel System
Cooling
System
Maintenance
Description
Valve clearance shall be correct.
* this may be skipped if there is no noise due
to incorrect valve clearance, and engine
runs normally.
Compression shall be normal
* this may be skipped if running and exhaust
condition is normal at idle and under
acceleration.
Engine base shall be free of cracks or
deformation.
Mounting bolts and nuts shall not be loose or
missing.
Oil shall be clean and at correct level.
No noticable oil leaks shall be found in head
cover, oil pan, or pipes.
There shall not be any leaks in fuel tank,
hoses, or pipes.
Fuel hoses shall be free of damage or
deterioration.
Fuel filter shall not be excessively dirty or
clogged.
There shall not be sediment or water in fuel
tank.
Injection puressure and injection condition
from the nozzle shall be normal.
* this may be skipped if running and exhaust
c o n d i t i o n i s n o r m a l a t i d l e a n d u n d e r
acceleration.
Coolant shall be clean and at the correct
level.
There shall not be any leaks from radiator,
engine, water pump, or hoses.
Radiator fins shall be free of clogging.
Radiator cap valve shall function properly.
Fan belt shall be free of wear and damage,
and shall be properly tensioned.
Cooling fan, duct, and cover shall be free of
cracks, damage, or deformation.
Mounting bolts and nuts on cooling fan, duct,
and covers shall not be loose or missing.
Schedule
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
-34-
Note
Contact your CANYCOM
representative for
√
inspection.
Contact your CANYCOM
representative for
√
inspection.
Inspecting/Changing:
Page 42
Inspecting: Page 49
√ √
Inspecting/Removing
√ √
water: Page 49
Contact your CANYCOM
representative for
inspection.
√
Inspecting/Filling:
Page 45
√
Adjusting: Page 47
√
√
√