ReliOn Micro User Instruction Manual page 51

Step 1:
Insert a test strip as shown
in diagram.
Test strip should seat
firmly into meter. The meter will turn
on automatically. The full screen will
come on for a moment. Make sure
all symbols appear on the screen
(see page 8). The last result will then
appear. Then the code number (F-
2, F-3, or F-4) will appear for three
seconds followed by the Apply Blood
. Make sure that the code
Symbol
number on the screen matches the
code number on the test strip bottle.
If screen code does not match the test
strip code, use a new test strip. If code
still does not match, use a new bottle
of test strips or call Customer Service
at 855.776.0662.
51