Embedded vortex86 aio sbc with 1s/crt/video-in/tv-out/audio/1 lan/usb (30 pages)
Summary of Contents for Icop VSX-6121-V2
Page 1
Full 16-bit ISA Bus VSX-6121-V2 DM&P Vortex86SX 300MHz Half-Size CPU Module with 2S/4USB/GPIO 128MB DDR2 Onboard User’s Manual (Revision 1.0A) http://www.microcomputersystems.com...
T a b l e C o n t e n t s T a b l e o f C o n t e n t s .............iii C h a p t e r 1 Introduction……………………………………………1 Packing List............1 Product Description ..........
Package Embedded Vortex86SX CPU All-in-One Board Manual & Drivers CD x 1 RS232 cable x 1 PRINT cable x1 VSX-6121-V2 IDE cable x 1 USB cable x 2 (USB port x 2 GPIO cable x 1 YKB for PS/2 Keyboard & Mouse x 1 Vortex86SX™...
Half-Size controller. The VSX-6121-V2 family of controller is designed as a plug in replacement, with backward compatibility to support legacy software to help extend existing product life cycle without heavy re-engineering.
Specifications Features VSX-6121-V2 DM&P SoC CPU Vortex86SX- 300MHz Real Time Clock with Lithium Battery Backup Cache L1:16K I-Cache, 16K D-Cache BIOS AMI BIOS Bus Interface PC/104 Standard Compliant (Optional: PCI-104) System Memory 128 /256MB DDR2 onboard Watchdog Timer Software programmable from 30.5 us to 512 seconds x2...
Page 7
Flash Disk Support On board 2MB SPI Flash Disk (Driver: A) 44-pin IDE Flash Disk( EmbedDisk 16MB or above) Compact Flash Type I/II (Optional) SRAM support 512KB (Optional) Power Requirement Single Voltage +5V @ 340mA Dimension 184mm X 122mm (7.24 x4.80 inches) Weight 156g Operating...
C h a p t e r 2 Installation Board Outline (Note1: COM2 RS232/422/485 is selected by BIOS setting) (Note2: J39 Default setting of JTAG Has to be Disable: Pin 1 & Pin 2 short) (Note3: PCI-104 connector is optional: VI/O setting: +5V only) (Note4: Redundancy Signal and System-Fail-SW are optional) Vortex86SX™...
Pin Assignments & Jumper Settings J1: IDE (44 Pins) Pin # Signal Name Pin # Signal Name IDERST IDED7 IDED8 IDED6 IDED9 IDED5 IDED10 IDED4 IDED11 IDED3 IDED12 IDED2 IDED13 IDED1 IDED14 IDED0 IDED15 IDEREQ IDEIOW IDEIOR ICHRDY IDEACK IDEINT IDESA1 IDECBLID IDESA0...
Page 14
J3: USB 2 Pin # Signal Name Pin # Signal Name LUSBD2- LUSBD3- LUSBD2+ LUSBD3+ GGND GGND J4: JTAG Pin # Signal Name Pin # Signal Name J5: RESET Pin # Signal Name Pin # Signal Name Reset J6: Redundancy (Optional) Pin # Signal Name Pin # Signal Name...
Page 15
J8: PS/2 KBD / Mouse Pin # Signal Name Pin # Signal Name KBCLK MSCLK KBDAT MSDAT J9: COM 1 (Optional: TTL) Signal Signal Pin # Pin # Name Name DCD1 RXD1 TXD1 DTR1 DSR1 RTS1 CTS1 J10: COM2 RS232 / RS422 / RS485 (Optional: TTL) Pin # Signal Name Pin #...
Page 16
J11: GPIO (Port 0 / Port 1) Pin # Signal Name Pin # Signal Name GP00 GP10 GP01 GP11 GP02 GP12 GP03 GP13 GP04 GP14 GP05 GP15 GP06 GP16 GP07 GP17 J12: RS485 (Auto direction) Pin # Signal Name RS485+ RS485-...
Page 17
J18: Power Connector (Terminal Block 5.0mm) Pin # Signal Name J20: PRINT Pin # Signal Name Pin # Signal Name STB- AFD- ERR- INIT- SLIN- ACK- BUSY SLCT Vortex86SX™ Half-Size CPU Module Vortex86SX-6121-V2...
Page 20
J27: PC/104 + (Optional) VI/O setting: +5V only If you need to use VI/O as +3.3V, please use VDX-6121-FD-V2-P Pin # AD00 VI/O(+5V) AD02 AD01 AD05 AD04 AD03 C/BE0# AD07 AD06 AD09 AD08 AD11 VI/O(+5V) AD10 AD14 AD13 AD12 +3.3V C/BE1# AD15 +3.3V...
Page 21
J37: LINE OUT (Optional) Pin # Signal Name LOUTR LOUTL J38: MIC-IN (Optional) Pin # Signal Name MICVREF MIC-IN J39: JTAG Disable (Default setting: Pin 1 & Pin 2 short) Pin # Signal Name Pin # Signal Name JTAG Disable J41: Console Redirection (Pin 1 &...
Watchdog Timer There are two watchdog timers in Vortex86SX/DX CPU. One is compatible with M6117D watchdog timer and the other is new. The M6117D compatible watchdog timer is called WDT0 and new one is called WDT1. We also provide DOS, Linux and WinCE example for your reference. For more technical support, please visit: http://www.dmp.com.tw/tech or download the PDF file:...
GPIO (General Purpose Input / Output) 40 GPIO pins are provided by the Vortex86SX/DX for general usage in the system. All GPIO pins are independent and can be configured as inputs or outputs, with or without pull-up/pull-down resistors. We also offer DOS, Linux and WinCE example for your reference. For more technical support, please visit: http://www.dmp.com.tw/tech or download the PDF file:...
SPI flash (Serial Peripheral Interface) As SPI Flash Serial Peripheral Interface) offers many benefits including: reduced controller pin count, smaller and simpler PCBs, reduced switching noise, less power consumption, and lower system cost Many of users may consider using a formatted SPI flash to boot for the system or emulate SPI flash as Floppy (A: Driver or B: Driver).
C h a p t e r Driver Installation Operating system support The Vortex86SX-6121-V2 ISA CPU board supports Embedded software: Free DOS, DOS 6.22, PCDOS 7.1, DR-DOS, x-DOS, OS/2, Windows CE 5.0 / 6.0 Please get the drivers from the Driver CD which attached with the standard packing of Vortex86SX-6121-V2 board or please get it from DMP official website: http://www.dmp.com.tw/tech/vortex86sx/ Vortex86SX-6121-V2 also supports most of the popular Linux distributions, for more detail...
Mity-Mite Serial Server, Web Camera Tiny Server and RSIP Serial Server. DSock is free for All ICOP products using M6117D/Vortex86/Vortex86SX/Vortex86DX CPU and ICOP also provide the business version of DSock for those customers who are using other x86 CPUs.
BIOS Default setting If the system cannot be booted after BIOS changes are made, Please follow below procedures in order to restore the CMOS as default setting. Press “End” Key, when the power on Press <Del> to enter the AMI BIOS setup Press “F9”...
Warranty This product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no additional charge except as set forth in the following terms.