Table of Contents
Advertisement
Triangle V in the display
When a control is touched, the
symbols of functions which can be
altered will light up in the display.
These will vary depending on program.
Touch the "V" or "W" control repeatedly
until triangle V is underneath the
symbol of the required function.
Then select the function using the "OK"
control.
Triangle V will flash for approx.
15 seconds.
You can only make entries with the
"V" or "W" controls while the triangle
V is flashing.
If the triangle has stopped flashing,
you will need to select the function
again with the "OK" control.
The following will change each time "V"
or "W" is touched
– Duration "
" and End time " " in
increments of a minute,
– the Timer " " at first in increments of
5 seconds and then in increments of
a minute.
Touching the control for longer, speeds
up the change in the display.
Guide to the display
325
m
V
11
Hide quick links:
Advertisement
Table of Contents
