Getting Started - Motorola CT330 Manual

1. Getting started

IMPORTANT
Do not place your CT330 in the bathroom or other humid areas.
Location
You need to place your CT330 base within 2 metres of the telephone wall socket so that
the cable will reach. The socket-outlet shall be installed near the equipment and shall be
easily accessible.
Connecting the handset
A Battery compartment
Fit with 3 x AAA alkaline batteries.
B Linecord connection
Plug the line cord into the socket marked
C Handset connections
Plug the one end of the handset curly cord into the socket on the side of the base
marked and the other into the socket at the bottom of the handset.
NOTE
Batteries are used for LCD back light. Change the batteries periodically or when the back
light becomes dull.
This phone will operate even without installing the batteries.
6
A
B
C
on the underside of the base unit.
Getting started