Table of Contents
Advertisement
1.
Getting started
Location
Important
Do not place your C42 in the bathroom or other humid areas.
Place your C42 corded base within reach of the mains power and telephone wall
socket so that the cables will reach. The socket-outlet shall be installed near the
equipment and shall be easily accessible.
Make sure that it is at least 1 metre away from other electrical appliances to avoid
interference. Your C42 works by sending radio signals between the cordless
handset and telephone base. The strength of the signal depends on where you
place the base. Placing it as high as possible ensures the best signal.
Cordless handset range
The unit has a range of up to 300 metres outdoors when there is a clear line of
sight between the telephone base and the cordless handset. Any obstruction
between the base and handset will reduce the range significantly. With the base
indoors and the handset either indoors or outdoors, the range will normally be up
to 50 metres. Thick concrete and stone walls can severely affect the range.
Signal strength
The
icon on your handset indicates that you are within range of the base. When
out of range of the base, the
icon flashes. If you are on a call, you will hear a
warning beep.
The line will hang up if the handset moves out of range of the base. Move closer to
the base. The handset will automatically reconnect to the base.
Setting up
Important
The base station must be plugged into the mains power at all times. Do not
connect the telephone line cord into the wall socket until the handset is fully
charged. Use only the power adaptor and telephone line cord supplied with the
product.
Getting started
8
Advertisement
Table of Contents
