Recall And Dial Mode; Change Your Dial Mode - Motorola CT330 Manual

11. Recall and dial mode

Recall is useful to access certain network services and PABX /switchboard services. Your
CT330 has 2 recall buttons, X is the short flash time and
NOTE
X Short flash is 100ms /
Flash keys are used to refresh a dial tone. When on an external call, press
a Call Waiting Line when a call waiting prompt signal is heard. Press again to toggle
between the two calls.
For more information about network services contact your network operator.
Your phone is set to tone dialling. You should only need to change this if connected to an
older type of switchboard / PABX which requires pulse dialling.
11.1

Change your dial mode

S
1. Press , the display shows
u d
2. Scroll or to
S
3. Press and the display shows the current setting.
4. Scroll u or d to the change the setting.
5. Press X to exit.
20
R
Long Flash is 600ms.
SEt 1 dAtE.
SEt 6 P_t.
R
is for long flash time.
R
Recall and dial mode
to access