Before Using For The First Time; To Enter Basic Settings - Miele H 5961 B Operating And Installation Instructions

Before using for the first time

To enter basic settings

The appliance will switch on
automatically when it is connected to
the electricity supply.
Welcome screen
A welcome screen will appear in the
display, and you will then be requested
to select some basic settings which are
needed before the appliance can be
used.
Follow the instructions in the display.
Setting the language
First select the language you want:
^ Scroll through the list using one of the
sensors to the right of the arrows
until the language you require
(
appears in the display.
^ Touch the sensor to the left of the
language you want.
A tick L will appear beside the
language you have selected.
^ Confirm your choice by touching the
sensor next to "OK".
Clock format
The request to select the Clock format
will appear. The default setting for the
clock is 24 h.
^ Touch the sensor to the left of the
clock format required.
A tick L will appear beside the clock
format you have selected.
^ Confirm with "OK".
26
Setting the time of day
You will then be asked to enter the time
of day. The hour is highlighted.
^ Use the sensor next to
hour, confirm with "OK" and then set
the minutes in the same way.
Time of day display
You will then be asked when you want
the time of day to show in the display
when the appliance is switched off:
ß On
The time is always visible in the
display.
ß On for 60 seconds
The time is only ever visible for 60
/ seconds.
%
ß Do not display
The time only shows in the display
when the oven is being operated.
^ Touch the sensor to the left of the
setting you want.
After you have confirmed your selection
with "OK", the display will show a
message to tell you that:
– your appliance is equipped for the
Miele|home system.
– your appliance has been successfully
set up to use it for the first time.
As soon as you confirm this last
message with "OK", your appliance is
ready for use.
If you have selected the wrong
language by mistake, proceed as
described in "Settings - Language"
to get back to the correct language.
to enter the
+