2. Safety Information 3. Setup DMX Cabling DMX Termination 3-pin vs. 5-pin Master/Slave Mode 4. Operation/Configuration Menu Structure DMX Control Mode Standalone Control Modes Master/Slave Mode Technical Specifications Photometric Data 5. Care/Maintenance Returns Shipping Damage Contact Us LED 54AW User Manual rev. A...
1. THEBEGINNING Thanks! Thank you for choosing the Bargeheights LED 54AW! This ver- satile PAR-style LED wash luminaire will provide reliable perfor- mance day in and day out. To ensure long lasting performance, please follow the guidelines in this manual. The instructions here are important for your safety and the maintenance of this fixture. Enjoy!
3. SETUP DMX Cabling The LED 54AW has standard 3-pin XLR connectors for DMX con- trol and daisy-chaining. Up to 32 devices can be daisy-chained together on a single run. Standard microphone cables will probably work OK, but DMX is a serial data transmission with impedance specifications that are different than analog audio.
DMX Data - Pin 3 Pin 3 not connected not connected not connected not connected Master/Slave Mode The LED 54AW also has a Master/Slave mode. In this mode you can set the first fixture in the line to act as the master control- ler – and up to 32 other fixtures can be connected and will mir- ror the operation of the first. In this configuration, you do not need a DMX controller. Master Fixture DMX IN DMX OUT Connect the fixtures just as you would for DMX control.
<UP> or <DOWN> buttons to change the settings. Once your changes are made press <ENTER> to accept the change. If the LED 54AW menu remains static for more than eight sec- onds it will automatically return to its last setting. To exit the menu without making any changes press the <MENU> button.
A001-A512 • Press <ENTER> to assign your selection. DMX Mode Channel List Channel Channel Value Function 0-127 Overall Intensity 128-249 Strobe Slow -> Fast 250-255 Full Intensity 0-255 Amber Intensity 0-255 White 1 Intensity 0-255 White 2 Intensity Page 10 LED 54AW User Manual rev. A...
• Press <MENU> then press <UP> or <DOWN> until FAdE displayed. • Press <ENTER> to select, and press <UP> or <DOWN> to adjust the speed of strobe ( FA00 FA12 is Color Cycle Mode. The LED 54AW will switch colors in ASC- varying speeds from AS00 AS12 • Press <MENU> then press <UP> or <DOWN> until ASC- displayed.
Master/Slave Mode. In this mode you can set one fixture in the line to act as the master controller – and up to 32 other fixtures can be connected and will mirror the operation of the Master. • Select the desired standalone mode on the Master LED 54AW. • Set the DMX address of each Slave fixture to A001 • Make sure the Master is the first fixture in the line connected via the 3-pin DMX connections on the rear of the LED 54AW. Page 12 LED 54AW User Manual rev. A...
Since there are no lamps to replace, maintenance is simple - just keep your LED 54AW clean and dry. Especially if you are in a dusty or haze-filled environment, there are some simple steps you can take to ensure a long, happy life for your LED 54AW. Keeping the lens area clean will ensure maximum light output. Use glass cleaner on a soft cloth to wipe down the lens area and the outer enclosure of the LED 54AW whenever it gets dirty or dusty.