Table of Contents
Advertisement
Repairs should only be carried out by an authorized technician in accordance
with local and national safety regulations. Unauthorized repairs could cause
injury or appliance damage.
The oven cannot be turned on.
Possible fault
There is no power to the steam
oven.
The fan can still be heard after the appliance has been turned off.
Possible fault
The appliance has a fan which
removes steam from the oven.
The steam generator is difficult to insert or remove.
Possible fault
The connection valve at the steam
connector needs to be lubricated.
The heating phase takes an unusually long time.
Possible fault
Check the bottom of the steam
generator. If there are calcium
deposits, check the water
hardness level setting.
Frequently asked questions
Solution
Reset the circuit breaker if it has tripped.
If this is not the case, disconnect the
appliance from the power supply for 1
minute.
Reconnect the power and turn the
appliance on. If it still does not heat, contact
Miele Technical Service.
Solution
The fan will continue to run for a while after
the oven has been turned off.
Solution
Lubricate the connection valve (not the
electrical connection!) with a small amount
of the supplied silicone grease. See
"Cleaning and care - Connection valve".
Solution
Set the level to the water hardness of your
area. See "Setting the water hardness".
Descale the steam oven as described in
"Descaling".
If the water hardness is set correctly or if the
problem persists, call Technical Service.
41
Hide quick links:
Advertisement
Table of Contents
