Advertisement
Adjusting the handle height
Your EziCaddy has 6 height adjustment settings. To adjust the handle height, first
fold the trolley. Then unscrew the locking screw 14 by about 6 mm until the
handle adjuster plate can be lifted off the teeth below. This then allows you to
select one of the 6 available handle heights. Move the plate forward to raise the
handle height and backwards to reduce the handle height. Please note that the
adjustment plate cannot be moved if the trolley is open. Finally, re-do screw 14
tightly.
Fitting the plug-n-play battery
To fit the battery, hold it vertically and, from the rear of the trolley, present it base
downwards to the main chassis. The notch in the base of the battery will locate in
the recess of the chassis. The top of the battery can then be pushed firmly
forwards to engage with the battery catch at the top of the battery.
To release the battery, press the battery release lever at the top and pull the
battery out of its docking station.
Always remove the battery before folding your trolley.
Page 5
Advertisement
