Advertisement
As a last resort, if you have forgotten your PIN and cannot gain access to your
EZiCaddy, there is a 4 digit PIN printed below:
To have your distances and speeds display in imperial or metric measurements:
1.
Turn off the power to your EZiCaddy.
2. Make sure that you are not in competition mode because this mode
stops you from viewing distances.
3. Press and hold down both Left Hand and Right Hand buttons
simultaneously for three seconds and the first feature that you can
change (Time) will flash slowly.
4. Press the right hand button and the next feature you can change
(COMP) will flash.
5. Press the right hand button again and the next feature you can change
(PIN) will flash.
6. Press the right hand button again and the final feature you can change
Yards/Metres will flash.
7. Press the control knob to toggle between "Metres" and "Yards".
8. To save and exit, press and hold down both Left Hand and Right Hand
buttons simultaneously.
7921
Page 18
Advertisement
