Advertisement
•
If you turn off the power when moving, the trolley will remember your
power setting and you will see the Power reading flashing. On turning
the trolley back on, it will gradually accelerate back to that power
setting.
•
If you have turned off the power when moving and do not want to
start off with the same setting, simply rotate the control knob
anti-clockwise. You will see the flashing power setting reduce.
•
Your trolley will always forget its power setting and revert to zero if
you disconnect the battery.
•
If the Power reading on your EZi5 is a steady "1" or above, it will be
trying to move and will be consuming battery power. So don't
inadvertently drain your battery by leaving it in that condition up
against an obstacle.
Distance Readings
There are three distance read-out options:
1
Drive
2
Approach
3
Total distance
You can toggle between these readings by repeatedly pressing the Left Hand
button.
Page 10
Advertisement
