Advertisement
To Toggle between Clock and Elapsed time
Press the Right Hand Button. The words "Elapsed" will appear and disappear
when your EZiCaddy is displaying the selected time measurement
To Zero the Elapsed Time
The elapsed time is set to zero when you disconnect the battery.
To set the Clock correctly
•
Turn off the power to your EZiCaddy by pressing the control knob.
•
Press and hold down both Left Hand and Right Hand buttons
simultaneously for three seconds and the first feature that you can
change (Time) will flash slowly.
•
Press the control knob to select Time.
•
Rotate the control knob to select the first digit you want.
•
Press the control knob to save and move on to the next digit.
•
Repeat steps 4 and 5 until you have the correct time flashing.
•
To save and exit, press and hold down both Left Hand and Right Hand
buttons simultaneously until the time stops flashing.
Page 14
.
Advertisement
