Advertisement
7. Rotate the control knob to the digit of your choice.
8. Press the control knob to save and move on to the next digit.
9. Repeat until you have saved the number.
10. The display will read "PIN" and "ON"
11.
To save and exit, press and hold down both Left Hand and Right Hand
buttons simultaneously
Now, whenever you connect your battery, your display screen will light up
with a flashing "0---" and you will need to enter your 4 digit PIN as follows:
1.
Select the first number of the PIN by rotating the control knob.
2. Push this knob to confirm and move on to the next number.
3. Repeat steps 1 and two for the remaining numbers.
If you get the PIN wrong, the screen will revert to the first digit and you will
not be able to use your EZiCaddy until you enter the correct PIN.
There are no limits to the number of attempts at getting the PIN right.
To Disable the PIN
1.
Turn off the power to your EZiCaddy.
2. Press and hold down both Left Hand and Right Hand buttons
simultaneously for three seconds and the first feature that you can
change (Time) will flash slowly.
3. Press the right hand button and the next feature you can change
(COMP) will flash.
4. Press the right hand button again and the next feature you can change
(PIN) will flash.
5. Press the control knob and the PIN will be turned OFF.
6. To save and exit, press and hold down both Left Hand and Right Hand
buttons simultaneously.
.
Page 17
Advertisement
