Advertisement
Both "Drive" and "Approach" are set to zero on connecting the battery.
To re-set "Drive" to zero, turn off the power to your EZiCaddy by pressing the
Control knob and when the display is already showing "Drive" press and hold
the Left Hand button for about 3 seconds. This also sets "Approach" to zero.
To measure how far you have driven the ball off the tee, zero the "Drive"
reading and walk directly to your golf ball. You will see the "Drive" reading
increase until you reach your ball.
To re-set "Approach" to zero, turn off the power to your EZiCaddy by pressing
Control knob and then when the display is already showing "Approach" press
and hold the Left Hand button for 3 seconds.
To measure how far your approach will be, zero the "Approach" reading as you
go past the nearest Fairway Distance Marker (make a mental note of the
marker distance reading!). Continue walking to your ball and subtract (or add)
the Approach measurement from the Distance Marker (according to whether
your ball is beyond or before that marker) to give you the distance to the
green.
"Total Distance" cannot be re-set, even if you unplug the battery. It simply
displays the lifetime mileage of your EZiCaddy to date including the in-factory
testing.
Page 12
Advertisement
