Cerio CS-2224-14P User Manual page 44

Member: Choose link group port.

State: Choose Enable / Disable the link group function.

Type: The IEEE 802.3ad Link Aggregation Control Protocol (LACP) enables the dynamic

aggregation of physical links and The Link Aggregation Control Protocol (LACP) is defined in
IEEE 802.3ad. It uses link aggregation control protocol data units (LACPDUs) for information
exchange between LACP-enabled devices. With the usage of preserved fields in LACPDUs,
LACP can deliver extended functions in addition to its basic functions.
Static: switch and switch between must be fixed and setting Link Aggregation

Group(LAG) function.
LACP: switch sides set to LACP mode, The ports on the switch through asking way to

check whether to join LAG, If there to join LAG, LACP connection can be achieved,
otherwise they skipped LACP connection.
Activity: Both switches use "LACP" to configure the Trunk, at least one of them should be

"Active".
Active：Set the port in this category will take the initiative to ask link port whether the

LACP trunk. If yes, Join the Manage Connections in LACP
Passive：The main can reply to active, and passive connectivity to reach LACP.

Click "Save" to confirm and finish the setting