Page 1
ST-MIX Stereo mix accessory pedal for the Memory Lane User Manual v1.00 • May 1, 2007 ST-MIX user manual v1.00!
Page 2
• adapter passthrough jack and included patch cable allows a single Memory Lane power adapter (or 18 power cable from a pedal supply) to power both an ST-MIX and a Memory Lane • genuine Hammond cast aluminum 4.4 x 3.2 x 1.6 inch case...
Page 3
QUICK SETUP INSTRUCTIONS - MEMORY LANE TO TWO AMPLIFIERS If you’re using the ST-MIX to interface a Memory Lane to two guitar amplifiers, follow these basic instructions: POWERING Take the power adapter plug normally connected directly to the Memory Lane (whether using the Memory Lane’s provided 24VDC adapter, or a custom cable used with pedal...
Page 4
FULL STEREO The ST-MIX can be used to take stereo inputs to the L IN and R IN inputs and mix a third signal from PAN IN between the L OUT and R OUT outputs. This topology can be used...
Page 5
18 and 24VDC), and connect it in- stead to any one of the two power jacks on the ST-MIX. Then, using the provided patch cable, connect the remaining power jack on the ST-MIX to the DC input on the Memory Lane.
Need help?
Do you have a question about the ST-MIX and is the answer not in the manual?
Questions and answers