controL moDe
This setting mode enables you to switch between Mode 2 and
Mode 4.
Mode 2: Rotation of the helicopter is on the left-hand joystick
Mode 4: Rotation of the helicopter is on the right-hand joystick
Switching between Mode 2 and Mode 4
• Switch off the transmitter.
• Keep the control mode button (illustration) pressed.
• Switch on the transmitter
• Release the button
• Transmitter switches between Mode 2 and Mode 4
• Check the function on the ground before flying
InSertIng tHe memory carD (not IncLuDeD)
takIng pHotoS/VIDeoS
photo/video
GB // 24
control Mode
Push the micro SD card (not included) into the card slot as shown
in the illustration.
The card clicks into place. If you push the card a second time, it
slides back out again. The flight battery must not be connected to
the model when inserting or removing the SD card.
taking photographs:
Keep the photo/video button on the transmitter pressed for seve-
ral seconds to take an individual picture (photo).
The status LED on the helicopter changes. Blue lights up conti-
nuously and red flashes briefly.
Video recording:
Briefly press the photo/video button on the transmitter to start
recording a video clip and finish.
The status LED on the helicopter changes. Blue and red light up
continuously.
Reading the SD card:
Switch the camera off and then remove the SD card.
Now you can view and edit the images and video footage on the
computer.