Table of Contents
Advertisement
INSTALLATION of the hang on the wall electric fire
NOTE: Please take care when installing the fire as some edges may be sharp.
1) Using the TEMPLATE provided and a
spirit level, mark through with a pencil.
3) Insert the 2 screws, leaving 5mm (approx)
proud of wall.
Helpline email address: helpline@adamsurrounds.co.uk
CO9043
Customer telephone helpline: 08448 809301
- 5 -
2) Drill 2 holes using a 6mm drill bit, then fit
the supplied wall plugs. Note if fitting on to
plaster board, propriety wall fixings should be
used (not supplied).
4) Hang the fire on the hooks situated on the
back of the fire.
V3_151110
Advertisement
Table of Contents
