Rac Read Only Test - Casio SE-S10 Service Manual

[ 11 ]

RAC READ ONLY TEST

[Notes]
Proper operation is not guaranteed for the internal data and main device of RAC used in this test.
Be sure to perform RAC WRITE/READ TEST before this test.
[Function]
Tests if the device reads RAC data correctly.
[Operation]
n 1
Command:
n: Number of times to run
0 Once
1 ~ 9 Infinite loop
● If a command to specify the number of times to run the test is omitted, the test is performed only once.
● To forcibly terminate the infinite loop, press [C (Clear)] or turn the Mode Switch to [OFF].
[PRINT]
RAM
RAM WR
END
1 4 SUBTOTAL
114
OK
114
— 17 —