Check Compatibility Of Vehicle And Accessories; Setting The Dip Switches Of The Can-Box Tv-400; Setting The Dip Switches Of The Usb-Box Usbc-M500; Automatic Switching To Rear-View Camera - Caraudio-Systems usbLOGIC USB-MFD2 User Manual

1.2.

Check compatibility of vehicle and accessories

Requirements
Vehicle
Navigation
Limitations
Factory-TV-tuner
USB-port
1.3.

Setting the dip switches of the CAN-box TV-400

All vehicles
1.4.

Setting the dip switches of the USB-box USBC-M500

The default dip switch settings of the USB-box
need to be changed ONLY if an after-market
rear-view camera shall be connected or if the AV
of the usbLOGiC shall be deactivated. The dip
switches are located inside the USB-box.
For changes it is necessary to open the box.
Default settings are:
dip1 = ON, dip2 = OFF, dip3 = ON

1.4.1. Automatic switching to rear-view camera

If an after-market rear-view camera shall be connected, in order for
the usbLOGiC to automatically switch to its camera input on engaged
reverse gear,
set dip2 = ON (up).

1.4.2. Deactivating usbLOGiC AV-input

If no peripheral AV-source shall be connected to the usbLOGiC, we
recommend to disable the AV-input, to avoid customers switching by
mistake to black/no picture of the AV-input. In order to disable the
AV-input of the usbLOGiC,
set dip1 = OFF (down).
Version 31.08.2011
Volkswagen and Skoda
MFD2/RNS2 or Nexus navigation
Must NOT be installed.
Only for media which work with power supply by ONE single USB
connector.
dip 1 ON, dip 2 OFF, dip 3 OFF
Dip switches
of USB-box
Dip switches
of USB-box
USB-MFD2