Table of Contents
Advertisement
1.2.
Check compatibility of vehicle and accessories
Requirements
Vehicle
Navigation
Limitations
Factory-TV-tuner
After-market rear-view cam
USB-port
1.3.
Setting the dip switches of the USB-box USBC-M500
The default dip switch settings of the USB-box
need to be changed ONLY if an after-market
rear-view camera shall be connected or if the AV
of the usbLOGiC shall be deactivated. The dip
switches are located inside the USB-box.
For changes it is necessary to open the box.
Default settings are:
dip1 = ON, dip2 = OFF, dip3 = ON
1.3.1. Automatic switching to rear-view camera
If an after-market rear-view camera shall be connected, in order for
the usbLOGiC to automatically switch to its camera input on engaged
reverse gear,
set dip2 = ON (up).
Note: With after-market cameras, automatic switching works only from
usbLOGiC mode.
1.3.2. Deactivating usbLOGiC AV-input
If no peripheral AV-source shall be connected to the usbLOGiC, we
recommend to disable the AV-input, to avoid customers switching by
mistake to black/no picture of the AV-input. In order to disable the
AV-input of the usbLOGiC,
set dip1 = OFF (down).
Version 31.08.2011
Mercedes Benz C-Class (W203) til 04/2004, CL-Class (C215) from
09/2002 til 09/2003, CLK-Class (C208 W208) all years, CLK-Class
(C209 W209) til 05/2004 , E-Class (W210) all years , G-Modell
(W463) til 03/2007, ML-Class (W163) all jears, S-Class (W220)
from 09/2002 til 09/2003, SL-Class (R230) til 06/2004
Comand 2.0, Comand APS CD
Must NOT be installed.
Automatic switching to camera only works from usbLOGiC mode
Only for media which work with power supply by ONE single USB
connector.
Dip switches
of USB-box
Dip switches
of USB-box
USB-C20
Advertisement
Table of Contents
