After-Market Rear-View Camera; After-Market Rear-Seat-Entertainment - Caraudio-Systems usbLOGIC USB-MFD2 User Manual

3.4.3. After-market rear-view camera

Connect the video RCA of the after-market rear-view camera to female
RCA connector R-CAM IN of USB-box USBC-M500.
Connect the green wire of C3C-VW02 to the camera power supply (max. 1A)
The green wire is high (+12V) when reverse gear is engaged.

3.4.4. After-market rear-seat-entertainment

Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector
VIDEO OUT of USB-box USBC-M500.
Note: As the output is a full output, not shared with the video signal for the
navigation system, splitting the video with an RCA Y-cable might give a good enough
picture for two rear-seat-entertainment monitors. If not, or if connecting more than
two monitors, use a video splitter.
Version 31.08.2011 USB-MFD2