Connections To Head-Unit - Caraudio-Systems usbLOGIC USB-MFD2 User Manual

3.2.

Connections to head-unit

Remove the head-unit from the dash-board.
Transfer female Quadlock connector from the back of the head-unit to male
Quadlock connector of harness C3C-VW02.
Plug female Quadlock connector of C3C-VW02 into male Quadlock socket of
head-unit.
Plug female 18pin AMP-connector of C3C-VW02 into male 18pin AMP-socket of
head-unit.
Note: If the 18pin AMP-socket of the head-unit is already occupied, the vehicle probably has
a factory rear-view camera or a factory TV-tuner. In case of a factory tuner, it must be
uninstalled: disconnect the female 18pin AMP-connector of the factory harness and
disconnect all wires from the factory TV-tuner. In case of a factory rear-view camera you
have ordered/received the wrong product, call for support.
Version 31.08.2011 USB-MFD2