Table of Contents
Advertisement
3. Installation
Switch off ignition and disconnect the vehicle's battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
Place of installation is behind the head-unit.
3.1.
Interconnecting USB-box, CAN-box and harnesses
Plug harness C3C-AV into 6pin Molex of USB-box USBC-M500.
Plug harness C3C-VW02 into 8pin Molex of CAN-box TV-400.
Plug harness C3C-VW02 into 14pin Molex of USB-box USBC-M500.
Plug female 18pin AMP-connector of C3C-VW02 into male 18pin AMP-socket of
USB-box USBC-M500.
Version 31.08.2011
USB-MFD2
Advertisement
Table of Contents
