Operation; Activation Of The Video-In-Motion Function; Selecting The Usblogic As Current Av-Source; Switching Between Internal Usb And Av-Input - Caraudio-Systems usbLOGIC USB-MFD2 User Manual

4. Operation

4.1.

Activation of the video-in-motion function

The video-in-motion function is activated permanently without disturbing the navigation
performance.
4.2.

Selecting the usbLOGiC as current AV-source

CD-Version - Push AUX button of head-unit, then select
TV to choose the usbLOGiC as current AV-source.
DVD-Version - Push CD button of head-unit, then select
AUX to choose the usbLOGiC as current AV-source.
4.3.

Switching between internal USB and AV-input

After selecting the usbLOGiC as current AV source, push the right knob for 3 seconds to
switch between USB and AV-input. Repeat to switch back.
Note: If the AV-input is deactivated (see chapter "Deactivating usbLOGiC AV-input"), it is not
possible to switch to the usbLOGiC's AV-input AV-IN.
4.4.

Assigning device control for connected AV-source

After selecting the usbLOGiC as current AV source, switch to the usbLOGiC's
AV-input. Now longpress number key "1". The MFD will display "TV 2" and
"RC01". Turn right knob until the device-related IR-code as described in
device control table (appendix A) is reached. Push right knob to confirm
the assignment.
If the vehicle has no MFD display in the instrument panel (for example in case of retrofitted
navigation systems), you must count the notches when turning the knob (to the right +1, to
the left -1). At the same time, remember that the starting point is channel RC01 (the first
notch to the right is then already RC02).
Note: If the AV-input is deactivated (see chapter "Deactivating usbLOGiC AV-input"), it is not
necessary, nor possible to assign device controls.
Version 31.08.2011 USB-MFD2