Superior TF18NV Installation And Operation Instructions Manual page 22

EMBER PLACEMENT
WARNING: Do not use any
other ember material not sup-
plied with this unit.
WARNING:
without ember material correctly
in place as shown in Figures 55
& 56. Do NOT place ember mate-
rial anywhere else on the unit.
Use only ember material supplied
with unit. Excessive or incorrectly
placed ember material may pro-
duce carbon monoxide or soot. If
replacement embers are needed,
the replacement embers must be
purchased from IHP. See page 34
for part numbers.
WARNING: All previously ap-
plied loose material must be re-
moved prior to reapplication.
Ember Material
Figure 56 - Placement of Rock Wool (shown with Platinum Bright Embers)
22
INSTALLATION
Do not operate unit
Figure 55 - Platinum Bright Embers
Rock Wool
www.SuperiorFireplaces.US.com
Continued
1. Two ember materials are supplied with
this log set. Platinum Bright Embers give
a bright glow appearing as hot coals.
Should embers need replacing, see Parts,
page 34.
Platinum Bright Ember placement. Add
embers to front, flat burner. Gently remove
embers from bag. Separate pieces of
ember material and place on surface of
flat burner just behind horizontal ports as
shown in Figure 55.
Rock Wool placement. Place rock wool
material on front flat burner in areas away
from ports as shown in Figure 56.
2. Add lava rock and small decorative logs
around base of heater if desired. DO NOT
place rock or additional logs on front
burner or on logs. Placing any material
on unit other than ember material on front
burner may result in production of carbon
monoxide or soot. Use lava rock to hide
wires from switch/log to control valve.
Place switch/log so the switch is easy to
access.
Flat Front Burner
126817-01A