Enerco HS170NG Operating Instructions And Owner's Manual

Forced-air natural gas construction heater
Hide thumbs Also See for HS170NG:

Advertisement

OpERATING INSTRUCTIONS AND OwNER'S MANUAL
HEATSTAR
HS170NG
wARNING: If the information in this manual is not followed exactly, a fire or
explosion may result causing property damage, personal injury or loss of life.
— Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
— WHAT TO DO IF YOU SMELL GAS
Do not try to light appliance.
Extinguish any open flame.
Shut off gas to appliance.
— Service must be performed by a qualified service agency.
This is an unvented gas-fired portable heater. It uses air (oxygen) from the area in which it is used.
Adequate combustion and ventilation air must be provided. Refer to page 3.
READ INSTRUCTIONS CAREFULLY: Read and follow all instructions.
Place instructions in a safe place for future reference. Do not allow
anyone who has not read these instructions to assemble, light, adjust or
operate the heater.
Model # 150FATNG
FORCED-AIR NATURAL GAS
CONSTRUCTION HEATER
ENERCO GROUP, INC., 4560 W. 160TH ST., CLEVELAND, OHIO 44135 • 216-916-3000
70101 Rev. C 04/08

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HS170NG and is the answer not in the manual?

Questions and answers

Summary of Contents for Enerco HS170NG

  • Page 1 This is an unvented gas-fired portable heater. It uses air (oxygen) from the area in which it is used. Adequate combustion and ventilation air must be provided. Refer to page 3. ENERCO GROUP, INC., 4560 W. 160TH ST., CLEVELAND, OHIO 44135 • 216-916-3000 70101 Rev. C 04/08...
  • Page 2: Table Of Contents

    FUEL CONSUMPTION ....... 138 cu-ft/hr (3.9 cu-m/hr) FUEL ORIFICE PORT NO.: ....18 FUEL ORIFICE PORT SIzE: ........1.5MM HEATED AIR OUTPUT: ..450 CFM (12.74 CU M/M) Operating Instructions and Owner’s Manual Enerco Group, Inc. | Force-Air Natural Gas Construction Heater...
  • Page 3: Operating Precautions

    Locate 10 ft. from canvas or plastic tarpaulins or similar coverings and secure them to prevent flapping or movement Forced air (HS170NG) 3 ft 3 ft due to wind action. Enerco Group, Inc. | Force-Air Natural Gas Construction Heater Operating Instructions and Owner’s Manual...
  • Page 4: Odor Fade Warning

    • If there is an underground leak, the movement of gas combustion tube to desired position. through the soil can filter the odorant. Operating Instructions and Owner’s Manual Enerco Group, Inc. | Force-Air Natural Gas Construction Heater...
  • Page 5: Storage & Service

    The heater should be inspected before each use, and at least annually by a qualified person. Turn off the gas at the heaters natural gas supply when the heater is not in use. Enerco Group, Inc. | Force-Air Natural Gas Construction Heater Operating Instructions and Owner’s Manual...
  • Page 6: Wiring Diagram

    Green 7” Flame Control Ground (Harness) 7” Flame Control Terminal Block (Harness) White 6” Flame Control Terminal Block (Harness) Black 6” Flame Control Terminal Block (Harness) Operating Instructions and Owner’s Manual Enerco Group, Inc. | Force-Air Natural Gas Construction Heater...
  • Page 7: Parts List

    Snap Bushing, 5/8 24340 Thermostat Mounting Bracket 22270 Label, CA Prop, 65 22254 Thermostat Assembly 26070 Loop Clamp, 5/16 * Item not shown on exploded view Enerco Group, Inc. | Force-Air Natural Gas Construction Heater Operating Instructions and Owner’s Manual...
  • Page 8 If a part is damaged or missing, call our Technical Support Department at 800-251-0001. Address any Warranty Claims to the Service Department, Enerco Group, Inc., 4560 W. 160th St., Cleveland, Ohio 44135. Include your name, address and telephone number and include details concerning the claim.
  • Page 16 Operating Instructions and Owner’s Manual Enerco Group, Inc. | Force-Air Natural Gas Construction Heater...

This manual is also suitable for:

Heatstar hs170ng

Table of Contents