Advertisement
Gain page – from this screen it is possible to set the Output Channels Level from -12dB to +6dB,
press ENTER an arrow will appear on the left of the screen " -> " then use the "PM1" or "PM2"
buttons.
The value set on this screen will only affect the input level of the selected Channel 1/2/3/4/5/6.
The following is an example screen for the"Gain"page where the Gain of the Output Channel 1 is
set to +0.0dB
Limiter sub-menu – from this page it is possible to set the Output Channels Limiter.
The following is an example screen for the Limiter page where the Attack Time of the Limiter is
set at 5ms, the Release Time is set at 0.2Sec and the Limiter Active Threshold is set at +5dB:
Once pushing ENTER the Limiter's parameters can be modified using the"NAV/PAR1","PM2"and
"PM3" encoders for editing the Limiter's Attack Time [A]., Release Time [R] and Active Threshold.
Once pushing ENTER the above screen will change as follows:
The Attack Time [A] can be edited using the "NAV/PAR1"encoder, the Release Time [R] the"PM2"
encoder and the Limiter Active Threshold the "PM3" encoder.
"Attack Time [A]": the selectable range of the Limiter's Attack Time is from 5ms to 200ms in
steps of 1ms - from 5ms to 20ms then 5ms -
100ms and 20ms - from 100ms to 200ms.
The Limiter's Attack Time can be adjusted by rotating the "NAV/PAR1" encoder.
"Release Time [R]": the selectable range of the Limiter's Release Time is from 0.1s to 3s in
steps of 0.1s and can be adjusted by rotating the "PM2" encoder.
"Limiter Active Threshold" : the selectable range of the Limiter's Threshold is from +20dB
(Limiter not active) to -10.0dB in steps of 0.2 dB and can be adjusted by rotating the "PM3"
encoder.
Note1 : once the desired options have been selected using the 3 encoders, they are automatically
saved as current and stored in the DPA-260A system status once leaving the page.
Note2 : to exit this page, push the "ESC" button.
Out-1
Name
-> Gain = + 0.0dB
Out-1
Name
5ms
R: 0.2s
A:
Out-1
Name
-> A:
5ms
R: 0.2s
Gain
Limiter
+5.0dB
Limiter
+5.0dB
from 20ms to 30ms then 10ms -
30
from 30ms to
Advertisement
