Sos Siren/Keypad Lock; Using Radio In Group Mode - Midland X-Tra Talk GXT1000 Series Owner's Manual

Model GXT1000/1050 Series
SOS SIREN
To activate the SOS SIREN function, press and hold the DOWN/ SOS
SIREN button for 5 seconds. The SOS SIREN icon will appear on the
display, the radio will send out a loud siren sound and the display
backlight will flash. To deactivate the SOS SIREN function press the
PTT button.
KEYPAD LOCK
To avoid accidentally changing the radio setting, press the LOCK
button for 2 seconds. The KEY LOCK icon will appear on the display.
PTT and CALL will still be active. Repeat the same procedure to
unlock the keypad.
DISPLAY ILLUMINATION
During Power on, the display illumination will activate for approx. 5
seconds. The display illumination can also be activated when the
MENU, MON/SCAN, and
CHANNEL SELECTION (GMRS/FRS BAND)
Press the MENU button once, and then the
of the 50 GMRS/FRS channels. To confirm the selection, press the
PTT button or press the MENU button again to move to the next
feature setting.
USING THE RADIO IN GROUP MODE
Your GXT1000/1050 Series has GROUP MODE function which lets
you make "direct calls" to other people within the group without
alerting the entire group. The GROUP MODE function only works on
channels 1~22. It does not operate on channels 23~42.
In order to use the GROUP MODE function you need to set the
following in your radio:
Set the radio to Group Mode
l
Set a Group Code
l
Set the ID
l
Set the Caller ID
l
Set the Ring Tone
l
Page 11
/
button is pressed.
/ buttons to select one
www.midlandradio.com