Midland X-Tra Talk GXT1000 Series Owner's Manual page 12

Model GXT1000/1050 Series
Note : To communicate between two GXT1000/1050 Series radios
!
in Group Mode, the radios in your group must be set to
the same channel and Group Code selections.
Note : The GROUP Mode function only operate in channels 1~22.
SETTING THE RADIO TO GROUP MODE
To turn the GROUP MODE on, press the MENU button until the
display shows "Gr" blinking, while an "oF" appears on the right of the
display. Select "on" by pressing the
button to confim or press MENU button again to move to the next
feature setting.
When the radio is in GROUP MODE the Group Mode icon will appear
on the display.
SETTING GROUP CODES
Your GXT1000/1050 Series has 142 Group Codes available. To
select a Group Code press the MENU button while in Group Mode
until the Privacy Code blinks, and then the
of the 142 Group Codes. The Privacy Code icon on the display will
indicate your Group Code setting. To confirm the selection, press the
PTT button or press MENU button again to move to the next feature
setting.
SETTING THE ID NUMBER
Your GXT1000/1050 Series has 10 ID Number available. The
selected ID Number may be different for each Group Code. To select
an ID Number for the current Group Code press the MENU until the
display shows "Id", while the current ID number setting appears
blinking on the right of the display. Press the
of the 10 ID Numbers. To confirm the selection, press the PTT button
or press MENU button again to move to the next feature setting.
Page 12
/ buttons and press the PTT
/
buttons to select one
/
buttons to select one
www.midlandradio.com