To Transmit And Receive - Uniden UH076 Owner's Manual

Handheld uhf-cb transceiver
Table of Contents

Advertisement

Operation

To Transmit and Receive

The UH076 uses the UHF-CB Channels. For your reference a list of the
available channels and corresponding frequencies is printed on p.25 -
p.26.
1. The maximum RF transmit power of UH076 is 5 Watts.
To switch to low power, press
appears on the LCD.
To switch back to higher power, press
again. LOW indicator disappears from the LCD.
2. Before you transmit, listen for activity on the
selected channel.
3. When the channel is clear, press and hold the
PTT
to transmit. TX appears on the LCD.
Hold the radio with microphone approximately
five cms in front of your mouth with the
antenna at approximately 45* angle away from
your head. Speak in a clear, normal
conversational voice.
4. When you have finished speaking, release the
PTT
and listen for a response. TX indicator
then disappears on the LCD.
The display shows BUSY when a transmission
is being received by your radio.
UNIDEN UH076
1/5w
. LOW
1/5w
15
Handheld UHF-CB Transceiver

Advertisement

Table of Contents
loading

Table of Contents