Table of Contents
Advertisement
Features, Controls, & Operation
1,2..
1,2..
Speed Selector
Selects forward speeds 1-5 and reverse speeds 1-2. No
neutral position or gate is required, since the traction drive
design automatically provides "neutral" (no forward or
reverse movement), whenever the Drive Control is released.
Traction Control / Free Hand™ Lock
Engages traction drive to wheels when depressed. Also
locks broom control when depressed simultaneously.
Releasing the traction control lever releases the Free
Hand™ broom control lock and stops the drive wheels.
Broom Control
Engages the broom when depressed. Releasing the
control stops the broom.
Easy Turn™ Control
Easy Turn Control: Engaging the Easy Turn™ lever
releases the right wheel to allow easy turning in tight
areas. Releasing the control automatically engages both
drive wheels for full traction.
Traction Lock Pins: The right traction wheel can be com-
pletely released using the locking pin (see Figure 7). This
allows the unit to be easily moved with the engine off.
Fuel
Fuel tank filler cap. Note: The fuel shut off valve is located
under the fuel tank. When transporting or for long term
storage, close the valve. Open the valve before starting.
Throttle Lever
Controls engine speed. Move toward the hare icon for faster
engine speed, move toward the turtle icon for slower engine
speed. Set throttle to FULL/FAST (hare icon) for operation.
Move throttle past FAST to engage choke. Once engine is
running smoothly, move throttle to FAST run position.
Engine Power Switch
The Engine Power Switch prevents the engine from
being started. Rotate switch to ON position to start
engine, OFF on shut engine off.
Broom Swivel Lock
Broom Swivel Lock: Pull upwards to release the broom
swivel lock pin. The broom can be angled to either the
right, left or straight by rotating the broom frame with the
broom assembly resting on the ground. Release the broom
swivel lock to lock the broom in the selected position.
9
Advertisement
Table of Contents
