Haier HD80-26A User Manual page 11

6 Program knob
Start/Pause
7
button
Power button
8
9/10 Function and
Selection button
Note: The remaining time is a default value,
this time will be re-calculated depending on
additional program settings and the moisture
content of the laundry.
Select one of the 16 programs using the knob.
The indictor of the respective program lights up.
See Program Modes section of the manual for
further information.
Press Start/Pause to Start a drying cycle. Press
button again to pause the drying cycle – indicator
Press Power button to switch on/off the tumble
dryer.
There are 4 kind of functions to select
.
Function and Selection are a couple of buttons.
They should be selected together. Press the
Function button to select one function you
need-corresponding indicator icon is flashing,
then press Selection button-corresponding icon
lights up. You have finished the function setting.
Use the same method continue to select other
function as you need.
Note: Not all the funcions can be selected for
different program.
Signal function, you can choose it as you need.
Delay function for delay start, turn the knob to the
right to set time (in 1 intervals up to 19 hours).
The appliance shoule be finished in, afterwards
press to start the delayed operation.
Note: This function should be set after you
have finished program selection, otherwise
when you turn the knob, the function will be
delected automatically.
Delicate function for delicate fabrics. It lowers the
temperature and lengthens the drying cycle time
to take better care of the laundry.
English | 11