In order to prevent clutch slipppage (since
the engine oil also lubricates the clutch),
do not mix any chemical additives. Do not
use oils with a diesel specification of "CD
" or oils of a higher quality than specified.
In addition,
do not use oils labeled "ENERGY
CONSERVING II" or higher.
Make sure that no foreign material en-
ters the crankcase.
9. Start the engine and warm it up for seve-
ral minutes. While warming up, check for
oil leakage. If oil leakage is found, turn
the engine off immediately and check for
t h e c a u s e .
10. Turn the engine off, and then check the
o i l l e v e l a n d c o r r e c t i t i f n e c e s s a r y .
F i n a l g e a r o i l
Final gear oil measurement
1 . P l a c e t h e m a c h i n e o n a l e v e l s u r f a c e .
2 . R e m o v e t h e o i l f i l l e r b o l t , a n d t h e n c h e c k t h e
o i l l e v e l i n t h e f i n a l g e a r c a s e .
NOTE:
T h e o i l l e v e l s h o u l d b e a t t h e b r i m o f t h e f i l l e r
h o l e .
1 . F i n a l g e a r o i l
2 . F i n a l g e a r o i l f i l l e r b o l t
3 . P r o p e r o i l l e v e l
108