Mercedes-Benz C-Class Operator's Manual page 303

Remove the SmartKey from the ignition
X
lock.
or, in vehicles with KEYLESS-GO start-func-
tion or KEYLESS GO
Open the driver's door.
X
The on-board electronics now have status
0. This is the same as the SmartKey having
been removed.
The driver's door can be closed again.
All indicator lamps in the instrument cluster
must be off.
The fuses are located in various fuse boxes:
Fuse box on the driver's side of the dash-
R
board
Fuse box in the front-passenger footwell
R
Fuse box in the engine compartment on the
R
driver's side
Fuse box under the trunk floor on the right-
R
hand side of the vehicle, when viewed in the
direction of travel
The fuse allocation chart is on the fuse box in
the trunk ( page 302).
Y
Dashboard fuse box
! Do not use a pointed object such as a
screwdriver to open the cover in the dash-
board. You could damage the dashboard or
the cover.
! Make sure that no moisture can enter the
fuse box when the cover is open.
! When closing the cover, make sure that it
is lying correctly on the fuse box. Moisture
seeping in or dirt could otherwise impair
the operation of the fuses.
Open the driver's door.
X
To open: pull out cover : slightly at the
X
bottom in the direction of arrow =.
Fold cover : outwards in the direction of
X
arrow ;.
To close: fold in cover : until it engages.
X
Fuse box in the front-passenger foot-
well
! Make sure that no moisture can enter the
fuse box when the cover is open.
! When closing the cover, make sure that it
is lying correctly on the fuse box. Moisture
seeping in or dirt could otherwise impair
the operation of the fuses.
Open the front-passenger door.
X
To open: fold cover : out towards the rear
X
and remove it.
To close: clip in cover : at the rear.
X
Fold cover : forwards until it engages.
X
Fuses
301
Z