Seats
112
Adjust the seat properly before beginning
your journey. Always ensure that the backrest
is in an almost vertical position and that the
shoulder section of your seat belt is routed
across the center of your shoulder.
! To avoid damage to the seats and the seat
heating, observe the following information:
keep liquids from spilling on the seats. If
R
liquid is spilled on the seats, dry them as
soon as possible.
if the seat covers are damp or wet, do not
R
switch on the seat heating. The seat
heating should also not be used to dry
the seats.
clean the seat covers as recommended;
R
see the "Interior care" section.
do not transport heavy loads on the
R
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
when the seat heating is in operation, do
R
not cover the seats with insulating mate-
rials, e.g. blankets, coats, bags, seat cov-
ers, child seats or booster seats.
! Make sure that there are no objects in the
footwell under or behind the seats when
moving the seats back. There is a risk that
the seats and/or the objects could be dam-
aged.
The rear-compartment head restraints
i
can be removed (
Vehicles without the through-loading fea-
ture: the head restraints cannot be
removed from the rear compartment seats.
For more information, contact a qualified
specialist workshop.
Further related subjects:
i
Rear bench seat through-loading feature
R
(
page 260)
Y
page 112).
Y
Information in the Digital Operator's
Manual
In the Digital Operator's Manual you will find
information on the following topics:
Adjusting the seats
R
Adjusting the head restraints
R
Adjusting the 4-way lumbar support
R
Switching the seat ventilation on/off
R
Switching the seat heating on/off
Switching on/off
G
WARNING
Repeatedly switching on the seat heating can
cause the seat cushion and backrest pads to
become very hot. The health of persons with
limited temperature sensitivity or a limited
ability to react to excessively high tempera-
tures may be affected or they may even suffer
burn-like injuries. There is a risk of injury.
Therefore, do not switch the seat heating on
repeatedly.
The three red indicator lamps in the button
indicate the heating level you have selected.
The system automatically switches down
from level 3 to level 2 after approximately
eight minutes.
The system automatically switches down
from level 2 to level 1 after approximately ten
minutes.
Need help?
Do you have a question about the C-Class and is the answer not in the manual?
Questions and answers