Description; Mounting; Mobile Version; Permanent Version - ALGE-Timing Timy Manual

1

Description

The program CycleStart was developed especially for track cycling competitions. Two dis-
playboards, 2 cycle-startmachines and one loudspeaker signal can be controlled.
At cycling (chase), the start will be made with cycle-startmachines which are triggered off by
a potentialfree contact. The start will be normally after a 50 seconds lasting countdown with a
warning signal at 30 seconds and an acoustic 5-seconds-countdown.
After the countdown ends, the Timy automatically switches to the function Lap Counter and
Back-up.
Program Lap Counter consists of 2 separate lap counters, which can be controlled with the
buttons Start and Stop or via 2 external channels.
With the back-up function, you will be able to stop the time of every driver separately using
push buttons. The push buttons will be connected to the display board. It registers all net
time.
2

Mounting

There are 2 different versions for the CycleStart system.

mobile version

permanent version

2.1 Mobile version
This version is used for mobile timing systems with will be used in different stadions.
All distributor plug sockets are equipped with 7-pin amphenol-plugs and can be connected
together with our standard cables 200-xx or with cable reel T200.
2.2 Permanent version
Version for fix wiring. The big advantage is the fact that less cable must be laid on the sur-
face.
Page 4
Timy Cyclestart