One Touch Stunts - sky viper V950STR Instruction Manual

ONE TOUCH STUNTS

IMPORTANT
REMOVE THE CAMERA UNIT FROM THE DRONE BEFORE PERFORMING STUNTS. STUNT
FUNCTIONS WILL NOT WORK WITH CAMERA UNIT ATTATCHED. ALSO REMOVE BLADE
GUARDS WHEN FLYING IN ADVANCED SENSITIVITY MODE 3.
BARREL ROLLS
While flying forward (or reverse), press the
STUNT BUTTON.
NOTE: Once a stunt has been initiated,
DO NOT adjust Throttle or press any other
controls until the stunt has been completed.
FRONT BARREL ROLL
FLIPS
1
Bring the Drone to a mid air hover without flying in any
direction. Remove finger from the DIRECTION STICK
2
While HOVERING, press and hold the STUNT BUTTON.
3
While still holding the STUNT BUTTON, tap the DIRECTION
STICK in the direction you want to the drone to flip.
1
CAUTION!
Drone should be flying at least 9 feet in the air with a minimum clearance of 9 feet
in all directions before attempting stunt functions.
STUNT FUNCTIONS SHOULD BE PERFORMED OUTSIDE ONLY.
9
2
1
3
2
REAR BARREL ROLL
RIGHT FLIP
FRONT FLIP