Problem With The Projector - Microtek CX4 User Manual

Problem With The Projector

If a problem occurs with the projector, check first the Indicators on it. Each
Led Indicator represents the following messages:
Power Led Indicator
Color Status
Green Remains Lit
Red Remains Lit
Red Blinks
Lamp Led Indicator
Color Status
Indication Led remains off
Green Remains Lit
Green Blinks
Orange/Red Blinks
Alternately
Orange Blinks
Red Remains Lit
Red Blinks
The following are solutions to some common problems:
When the Power Led Indicator does not light up:
Check whether the power cord is securely connected with the
projector and the electricity socket, or check whether the lamp cover is
positioned and tightened correctly.
When the Projector Lamp does not light up:
The lamp is burned out; please replace it with a new lamp.
The Power Indicator remains red:
The lamp is turned off automatically due to overheating of the
projector. Wait until the lamp is cooled down before turning the
lamp on.
Check the air vents at the back and at the bottom of the
projector. If the filters are clogged from dust, clean the filters as
Meaning
The projector system is operating normally.
The projector is over heated, and the Power is off.
The projector has an internal problem(s).
Meaning
The lamp is turned off.
The lamp is turned on.
The projector is warming up.
The life of the lamp will soon end, please prepare
a replacement.
The projector is cooling down.
The life of the lamp has ended, please replace
with a new lamp now.
There is a problem with the lamp or power supply
of the projector.
45