Connecting To A Video Source - Microtek CX4 User Manual

both machines have been shut off.
1. Connect either end of the Computer Cable to the Computer In port of the
projector. Then, connect the other end of the Computer Cable to the Monitor
Out port of the Set-top Box.
Note: This projector is compatible with ATSC broadcast system. (U.S.A., Canada,
S. Korea, Taiwan, Argentina)
Note: The ATSC broadcast system uses AC-3 sound decoding mode. For the best
audio quality, we do no suggest you connecting the audio signal with the projector.
Please read the manual of your Set-top Box to connect to an external speaker.
Note: When connecting to a HDTV Set-top Box, this projector is compatible with
RGBHV connector (same with VGA D-Sub connector).

Connecting To A Video Source

The following procedures can be used to make connections to a video tape deck,
camcorder, laser disc player or any other compatible video image source of the
projector. The projector can receive composite video signals, S-Video signals and
Component Video signals. If the video source has a RCA video jack, it receives
composite video signals. If the video source has an S-Video jack, it receives S-
17